Toyota VSC light reset |VSC Light Toyota Highlander|What does the VSC light mean on a Toyota

Sharing is caring!

One of the common issue with Toyota vehicles is that the VSC light problem which makes the check Engine lights begins to illuminated simultaneously

It not on common to have noticed the VSC light in Toyota rav4 or the VSC Light Toyota Highlander, Camry and corolla.

You may even have also noticed VSC light in Toyota Sienna too if you own a sienna car.

Toyota VSC light reset | What does the VSC light mean on a Toyota| VSC Light Toyota Highlander Meaning

In this article, we are going to cover the Toyota VSC light problems for various Toyota models.

Here are the  sub-topic we are discussing in this article:

  • VSC Light Toyota Highlander
  • VSC Light in Toyota Rav4
  • VSC Light Toyota Camry
  • VSC Light Toyota Sienna
  • VSC Light Toyota Corolla

With those in mind let get started with what the VSC Light Mean On a Toyota?

Related Articles:

What Does The VSC Light Mean On a Toyota?

The Acronyms “VSC” simply means “Vehicle Stability Control “. The Traction Control of your vehicle will hardly work well while the VSC light is illuminated.

So what happens is that when your car VSC system recognizes that the vehicle has started losing traction, it spontaneously tries to apply the brake on all of the wheels of the car to keep the car from additional slips or skids.

At this point, the engine power is reduced which provides better control for the vehicle driver.

With this system, the driver of the vehicle can manage emergency cornering, understeering, and any form of skids.

The VSC is responsible for the reduced rate of road accidents driving under the rain, snowy or foggy weather.

So it is very crucial you check the VSC system on your Toyota whenever it starts to malfunction or stops working normally.

Here is a list of Toyota cars that have this VSC system in place to the safety of percenters.  This is not limited to only Toyota Cars:

Toyota Highlander, Sienna, Rav4, Avalon, Camry, Celica, Corolla, Matrix, Prius, Solara etc.

So what does it mean when the VSC light comes on?

A lot of Toyota car owners will find that when the car Check Engine and VSC lights are ignited, the system is simply indicating that there is an issue with the gas cap or the O2 Sensor.

Usually tightening the gas cap or replacing it may help fix the problem but where this did not work, then it is recommended you visit an automobile store or you take the vehicle in for servicing.

So is it safe to drive with VSC Light on?

Well, it depends on what the triggered the VSC light to come on.

If after checking you VSC system and the problem happen to be a O2 sensor related issue, you can still drive the vehicle for a while without further problems, but you might not be getting the right gas mileage.

Beside the VSC light is turned on because an error code has been registered. And this code will remain until they are repaired, cleared or reset.

O2 sensors can be challenging at the same time easy to replace by yourself but that is totally dependent on the model of the car.  

Some vehicle will require access underneath the vehicle, and others are can be accessed under the hood.

VSC Light Toyota Highlander

VSC Light Toyota Highlander

Toyota Highlander vehicle is medium size sports car which features, an automatic transmission, third-row comfortable sit choices and an all wheels’ drives

And is known for its high safety standard which requires regular checking of tire pressure, air bags and stability control system.

 A faulty or malfunctioned vehicle could temper with the car stability control system which may cause the VSC light to come on, on the dashboard.

If that happens the steps below will guide you on what you can do to reset the VSC warning light.

So  lets look at how to reset VSC Light Toyota Highlander

Toyota VSC light reset |How to Reset VSC Light Toyota Highlander?

Resetting the VSC warning light on your Toyota Highlander vehicle’s dashboard can be done by carrying out a simple repair step.

Please follow these steps to reset your

Step 1

Start by shorting down the car engine and then apply the parking brake so the car doesn’t move for yourself safety.

Step 2

Now open the car hood so you can inspect the car engine compartment.  Try to trace the air filter box which should be mounted on the left hand side of the car engine.

The air filter box has a black exterior and it is square shaped, large with a ribbed intake hose.

Step 3

Then examine the all of the small black vacuum lines around the air filter box. If there is any disconnection, try to reconnect anyone of them that is disconnected. If there are any loose vacuum lines you find reconnect it back and tighten it firm.

Step 4

Now go back into your car and try starting the engine and now drive the car to clear the “VSC” warning light on display.

If the VSC light fails to go off even after you have driven the car for a while, then you try the next steps

Proceed to the next step if you have completed step 4 and the VSC warning light is still present.

Step 5

Here you have to turn of the car engine and Park the vehicle safely and set it to the parking brake.

Now open the car hood, then disconnect the battery’s negative cable for 10 to 15 seconds, using the right size socket.

This will help reset the entire car computer which will then clear the VSC warning Light… and there you go.

That is you reset you How to Reset VSC Light Toyota Highlander. Easy right?

Here are the items you will need to carry out these activities.

Items you will need

  • Ratchet – you check this out on Amazon.
  • socket set – see the details on this here.

VSC light Toyota Camry

The VSC light Toyota Camry is just like every other car stability control present in most car that has this system in place. Some individual may confuse the Toyota Camry VSC light system with traction control (TC) system but that shouldn’t be.

You see the VSC being “vehicle stability control (VSC) in a Toyota Camry is what is responsible for preventing skidding while the TC is responsible for keeping the vehicle wheels from spinning on a slippery ground or surface just like I explained above.

And also some Toyota Camry model comes with a control switch to turn off the TC “traction control,” in case the car happens to be stuck on ice.

 On the other hand, there is no control switch to turn off or disable the VSC system need arises.

How to Disable VSC in a Camry

Try completing the following sequence within 30 seconds of starting your car to disable or reset your VSC light system.

With regular practice this process can be completed in less than 30 seconds. You will have to repeat the procedure for each time the engine is started. You might also need to watch the video above for a better grapes of this.

  • Step 1

Start by Turning off your car. Be sure that the car is in Park and the parking brake is disengaged. Then start the car engine. Immediately you start the car engine you want engage the parking brake control.

  • Step 2

Now fully depress the brake pedal and then release it. You then have to disengage the car parking brake.

  • Step 3

This time you have fully depress and hold down the brake pedal for few secs. Then Engage the parking brake and disengage it while you are still holding down the brake pedal.

Repeat this again.

  • Step 4

Now release the brake pedal and engage the parking brake then fully depress the brake pedal and then release.

Repeat again. And this should solve the problem.

Like I said earlier, you have to complete these steps within 30secs or less:

In summary this what it should look like:

Engage the parking brake. Fully depress the brake pedal, release. Fully depress the brake pedal, release. Disengage the parking brake. Fully depress and hold down the brake pedal. Engage the parking brake; disengage it. Engage the parking brake; disengage it. Release the brake pedal. Engage the parking brake. Fully depress the brake pedal, release. Fully depress the brake pedal, release.

When VSC and the Trac-off indicators lit appear on the dashboard, then you should know that you have successfully completed this process.


  • Don’t disable or try this if you are not sure you are really want the VSC turned disable or turned off. The VSC helps you be in control of your car in case of any emergencies.

Do not forget to disengage the parking brake before you drive off.

VSC Light in Toyota Rav4

How to Disable VSC Light in Toyota Rav4

The good the thing about turning off the VSC light in Toyota Rav4 is that it very simple. With just a click of a button you can turn on or off the both the Toyota VSC light   of RAV4.

You can also turn off or on the TC of Rav4 Car using a button.

How to Disable VSC Light in Toyota Rav4

To turn off the VSC light, simply push and hold the switch while the car is parked, this will turn of both VSC and TRAC system.

If the VSC light is on when you switched the button, it will “TRAC OFF” and VSC OFF indicator lights should come on.

And then to turn it off push the switch again to turn the entire system back on if you wish to do that.

trac off and check engine light toyota corolla

VSC light Toyota corolla |How to Reset VSC Light on Toyota Corolla

You follow any of the steps above to also reset your Toyota corolla VSC light if this approach did not work. Or good and see your car dealer.

How to Reset VSC Light on Toyota Corolla is as simple as you turning off your car engine and starting back for 10 times or more then the VSC light will disappear.

You might also try the method in this video if this didn’t work.

VSC light Toyota Sienna |How to reset VSC warning light Toyota Sienna 2 generation.

When the VSC light Toyota Sienna comes on, it is simply sign that there is an issue in the VSC or vehicle stability control system. Sometimes it could the car TC or traction control system.

The VSC light might come on if the engine switch is turned to “ON” this usually will go off after a while.

But If the light comes on when driving, that means car VSC system is not working properly or even working at all.

In this case, it is not advisable you continue driving with it on.  

Please contact your Toyota dealer if any of below cases is what you are experiencing:

  • If the VSC warning light does not come on after the car engine switch is turned to “ON”.
  • The VSC warning light remains on after the engine switch is turned to “ON”.
  • The warning light comes on while driving.
  • The “TRAC OFF” indicator light will come on when the “VSC” warning light comes on even if the “TRAC OFF” switch is not pushed.

Please watch this video to see how you can reset the How to reset VSC warning light Toyota Sienna

VSC light Toyota Sienna Reset

Start by pushing on the TRAC OFF button in, hold and the try to start the car. This will immediately turn off the check engine light and the VSC light.

Now you have to release the TRAC OFF button. If the VSC and TRAC OFF light is still lit, then turn it off again and release. This should work.

And if this did work, then try out the steps on How to Disable VSC in a Camry above. That should solve the problem.

So here is a summary VSC light Toyota issue we have cover in this post

We saw how to reset VSC light in Toyota rav4, the VSC light Toyota Sienna, the VSC Light Toyota Highlander, the VSC light Toyota corolla and finally reset of VSC light Toyota Camry.

We also in the beginning part of this article discussed What does the VSC light mean on a Toyota generally and if it is safe to drive with VSC light on.

Feel free to look up the area that affect your car specifically.

I really hope this article has helped please share if it has

Sharing is caring!

error: Content is protected !!