How to Fix Subaru Backup Camera + 5 Best 2014 Subaru Forester Backup Camera on Amazon

Last updated on August 1st, 2023 at 08:01 am

Originally published on EH car you can read it here,

Are you experiencing some problems with Subaru backup camera, I show will you how to fix Subaru backup camera and Subaru backup camera reset to apply in this article.

And even we will discuss the cost and procedure for 2014 Subaru outback backup camera replacement.

We also touched various reasons why 2011 Subaru outback backup camera is not working or stops.

Read: Subaru electronic Baking Problem and reset/ fix it.

And finally, we will show you the 5 top 2014 Subaru forester backup cameras on Amazon and the 3 best 2015 Subaru forester backup camera wires to use when replacing your Subaru camera.

So let’s get right into it. You might like this article on 7 Best Car Reverse Parking Sensors with Camera (Ultimate Guide)

Introduction

Subaru backup camera also called “a reverse camera” or “ a rear-view camera” is an irreplaceable video camera produced exclusively for the sole idea of being fixed to the rear of a vehicle to help in backing up.

The core purpose of Subaru backup camera is to avoid a backup or back-drive collision or accident.

Backup cameras are now fixed in almost every new vehicle, including BMW, Toyota and of cause Subaru’s.

The Subaru have these essential piece of car equipment, including the Subaru crosstrek backup camera and the 2008 Subaru outback backup camera which has been used for many years now.

All new vehicles are now going to be compulsorily equipped with the backup camera because as of May 2018, federal law has made it mandatory for all new passenger cars, trucks, vans and other vehicles weighing less than 10,000 pounds to be fitted with backup camera monitoring technology.

How Does the Subaru Backup Cameras Work?

When Subaru is set on reverse, a rear camera is automatically switched on and then it transmits an image the display monitor so you can see things behind. The process utilized by the Subaru backup cameras are just little complex and for each new model of Subaru, they are being upgraded a minute up every time.

So here is what happens, the image captured by the camera, the subaru crosstrek backup camera systems and every other backup cameras displays a mirror image to the monitor so the point of reference is accurate when you look at it, instead of sending out the picture that a usual camera make out.

For a fact, if you were viewing a direct feed of what the camera transmits, the image would appear reversed.

This could result to accidents because it would actually cause you to steer left when you really intended to steer right.

Subaru Backup Camera Harness

The Subaru backup camera harness is a piece of electrical system adapter that consents to the installation of an aftermarket backup camera in Subaru models. The Subaru Crosstrek backup camera harness is designed for retaining or adding the factory back-up camera to non-equipped vehicles.

The Subaru backup camera harness works by plugging into the factory harness and providing the video from the back-up camera for aftermarket radio mechanism or connects between the factory harness and factory radio for incorporating into an aftermarket back-up camera.

Key features of the Subaru backup camera harness

Dual function item Retains OE back-up camera for radio replacement applications Allows addition of an aftermarket back-up camera to factory systems Prewired 6 volt output wire for OE camera retention when used with PAC RP4.2-TY11 radio replacement interface Integrated 6 volt output wire can be used for powering an aftermarket back-up camera (6V models only) when adding camera feature to OE radio

Subaru Backup Camera Reset

Most Subaru vehicles including the Subaru Crosstrek backup camera now come with a built-in backup camera which avails you to the opportunity to Reverse or back up your vehicle without you turning to look at what’s behind you. This is mostly beneficial for people with larger vehicles.

Your backup camera may develop faults due to several issues including issues with the video feed not loading on your reviewer mirror or the LCD display in the dash. You can effortlessly rectify the issue manually.

To reset Subaru Crosstrek backup camera and for other Subaru models, note the following steps:

Step 1: Clean backup camera

As you regularly use your backup camera, it is normal for it to become blocked with debris and dirt. When this happens, you find it difficult to see objects clearly, instead you’ll be getting black or brown images on your screen. Immediately you notice this, start resetting your Subaru backup camera by cleaning the camera using a clean, soft cloth.

Step 2: Power on the vehicle

After cleaning your backup camera, then put on your Subaru and go into reverse. This should make the backup camera transmits automatically onto the screen. It may indicate a monitor problem if the screen isn’t loading properly. If you notice a black image, this means the problem is with the actual camera. This cuts down parts you need to check.

Step 3: Check fuse box

If you are uncertain of where the fuse box is positioned, then you can check your owner’s manual. The fuse box is positioned under the steering wheel and it may point to an issue with your backup camera or monitor fuse. To confirm if your monitor fuse is blown, you can check for the exact fuse used to power your backup camera.

Step 4: Replace the fuse

If your fuse is blown, you should remove and replace it. You can obtain it from any automotive store. After fixing the fuse, start your Subaru and put on reverse, the backup camera should work properly.

2014 Subaru Outback Backup Camera Replacement

If the screen of your 2014 Subaru Outback Backup camera suddenly goes blue for some minutes before shutting down when you put your car on reverse or if it appears blurry and refuses to come on, then it may indicate a major fault that requires replacement of the camera. This fault may be as a result of water, since these parts aren’t waterproof.

You may not be able to fix this issue on your 2014 Subaru Outback backup camera without replacing any part. It may take you about $150 for replacement cost of the parts and about two hours for you to replace the part yourself. Ensure you test the camera before reassembling and after installing.

2010 Subaru Outback Backup Camera Replacement Cost

2010 Subaru Outback backup camera replacement cost is about $500 on online boards for both parts and labor cost.

To replace the 2010 Subaru Outback backup camera, start by removing the upper trim which will involve releasing the clips holding it to the adjacent molding, then pulling it outwards and downwards.

Then remove the side trim starting at the bottom on the outer side and releasing the clips connecting it to the main trunk panel and pulling it off.

Then use a thin small tipped screwdriver to push downwards and outwards to release the cover over the screw on the hand grip in the trim used to close the door.

Then remove the two screw type plastic clip connectors holding the upper and main trunk panel.

On the passenger side of lift gate interior has two connectors as seen in the right center of the picture have to be severed. The green wire connector is the trunk latch while the red/black wire connector is the license plate lights. To remove the outer trim, you have to release these.

On the driver side of lift gate interior, the gray rectangular connector is with the blue wrap.

Lastly, you need to remove the nuts fixed into the camera mount.

It will require you to use a 5/16 deep socket and 8mm socket remove all but some nuts. It will require you to remove 14 nuts in order to release the trim board on the outside.

Why is my 2011 Subaru Outback Backup Camera not Working?

It is a major issue when your 2011 Subaru Outback backup camera stops working. The backup camera technology is extremely helpful in averting accidents and helping with parallel parking.

However, it is comparatively easy to troubleshoot and fix your 2011 Subaru Outback backup camera yourself. It would equally cost you less to have it fixed by a professional auto repairer.

The problems with your Subaru Outback backup camera may be caused by your backup camera not having signal, your backup camera going blank, the screen of your backup camera going black & white, or blank.

If your backup camera not working:

If your 2011 Subaru Outback backup camera isn’t working, then you may be seeing display messages such as:

No signal
Black
Black and white visual noise

Now, let’s diagnose the problems based on the error display messages that may be indicated on your screen.

If there is no signal on your 2011 Subaru Outback backup camera:

Your backup camera may be indicating no signal due to several factors. If the no signal message is caused by a wifi camera which was functioning properly before now, then it may require you to reset the camera or the display. You can also check your fuses and the power cables for the camera usually situated at the rear of the trunk panel of your Subaru for any possible disconnection of wire or blown fuse.

For Subaru that have wired backup camera, then the fault may be as a result of wiring. It is still ideal to check your fuses to make certain that all is properly connected and no fuse is blown. Then trace the wiring and cables from the camera to the display will divulge the issue. For fixed dashboard displays, you should begin your troubleshooting at the camera and work to the display. This is because removing a dashboard display can be quite complicated, and should only come up as a last resort.

It is also ideal to first reset the whole system before troubleshooting so as to rule out any minor fault that a mere reset can handle.

If your 2011 Subaru Outback backup camera is black and white:

If your Subaru Outback backup camera display is alternating or displaying black and white static, then the issue is that you have a fraying wire or a defective connection. Ensure all of the cables and connections in your backup camera system are properly connected and fix any fault.

If your 2011 Subaru Outback backup camera screen black:

If your display isn’t functioning at all, then the issue is probably with the display, not the camera. So you can begin by checking the wiring diagrams for your Subaru. Ensure you didn’t mistakenly plug the camera into the AUX dash cable instead of the video feed. If your display isn’t coming on, then it may not be properly connected or the monitor may be faulty. In cases where the display is on, and doesn’t display ‘no signal’, then it means the fault may be from your camera. Ensure you check it properly for damage, and replace it if needed.

5 Best 2014 Subaru Forester Backup Camera On Amazon

1. Subaru 86267AJ10B Mudguard Assembly

The Subaru Mudguard Assembly is one of the best 2014 Subaru Forester backup camera available on Amazon that features OEM and high quality. This product is highly trustworthy. View more details here

2. Xroose Digital Backup Camera

Buy on Amazon

The Xroose Digital Backup Camera features a large 9” recorder monitor kit and FHD rear front side view reverse camera, and 1080P screen for backing vehicle. This backup camera is weatherproof and can withstand temperature of about -59°F to 176°F. Also, it is powered by 12-24 voltage power source and is highly durable. Read more detail here

3. Car Reverse/Rear View Parking Camera for Subaru Forester / Subaru Impreza WRX

This is one of the best 2014 Subaru Forester backup cameras that comes with a rearview camera for license plate light. The rear-view camera can be connected to any aftermarket monitor that has an RCA video input. It can also withstand all weather conditions. Read More here

4. Super HD CCD Sensor Vehicle 170 Wide Angle Night Vision Rear View IP68 Reverse License Plate Backup Camera

The Super HD CCD Rearview camera is also one of the best 2014 Subaru forester backup cameras that is also compatible with Subaru Outback (2001-2012), Subaru Impreza WRX (2009-2011), Subaru Forester Tribeca(2003-2012), and Toyota Prado.

It comes with the original fitting of vehicles and has a high clear night vision camera. It also avails you a better view of the back obstacles while on the reverse. Read more here

5. Pyle Backup Car Camera Rear View Mirror Screen Monitor System

The backup camera of this brand is strong with true color copy and video output of 10V PP 75 Ohm. It features a low lux performance and a wide viewing angle at 170°. This backup camera monitor features a 43 inches LCD mirror monitor screen display and NTSC/PAL video system. It features a rearview mirror assembly with universal sized clips and is able to connect to 2 video sources.

This backup camera monitor can be effortlessly setup and replace existing rear view mirror. It is waterproof and weatherproof. It also comes with fog resistant and night vision ability.

The backup camera kit also displays a precise distance scale line for proper parking and reversing without depending on side mirrors alone. View Price details here

3 Best 2015 Subaru Forester Backup Camera Wires on Amazon

1. AutoHarnessHouse Aftermarket Headunit Installation Adapter compatible with Subaru 2016-2019

This is one of the best 2015 Subaru Forester backup camera wires on Amazon that is compatible with 2016-2018 Subaru WRX, Crosstrek, Impreza, Legacy, BRZ, and 2015 Impreza/Crosstrek, including connecting your stock backup camera to your new aftermarket headunit. It comes with instructions for installations and retains backup camera for navigation and non-navigation models. You will find price details here

2. Germes Lab. Cable for Rear View Camera

This is one of the best 2015 Subaru Forester backup camera wires on Amazon that is gotten by connecting aftermarket car rear view cameras without a video interface. It is compatible with Subaru Impreza, Subaru Forester, Subaru Legacy, Subaru Outback, and Subaru Crosstreck cars of 2008-2015 models. Read more here

Camera images appear on screen when you switch to screen automatically during reverse.

3. SCOSCHE CADSU01 2012 – Up Subaru 16 Pin Camera Add-On Wire Harness

This Subaru Forester backup camera wire which is compatible with 2012 – up allows you to add on aftermarket back-up camera to screen. It features plug and play installation applications. It is compatible with Subaru 2013-up brz 2012-14 forester 2012-14 impreza/wrx 2013-14 xv Crosstrek 2013-14 frs 2014-15 sti.

Look up Current Price here

Conclusion:

Subaru backup camera and wire harness have been a major piece of Subaru vehicles for years now.

The Subaru cameras are usually targeted at a downward angle for the best capture the behind of your Subaru car; this makes it easier for you to get a more all-inclusive image than you get with a rearview mirror.

I hope this article has helped you, and with it, you now have seen how to fix Subaru backup camera problems.

You may pick any of the top 5 2014 Subaru forester backup camera On Amazon, if replacing your Subaru camera is what you are looking at doing.