How To Unfreeze Windshield Washer Fluid (windshield washer fluid frozen what to do)

Last updated on June 28th, 2023 at 02:12 pm

If your car windshield washer fluid is frozen, this the post for you to read. Here we will look at how to prevent windshield washer nozzles from freezing.

And many more windshield washer fluid issues so stick as we explain to you how to unfreeze windshield washer fluid and frozen windshield washer nozzles.

In addition, we would like to help you prevent this situation from happening in the first instance and this is why we will also be highlighting major tips on how you can prevent your windshield washer fluid from freezing as well as your windshield washer nozzles.

So if you are ready to learn more keep reading.

The first thing to do is to get a pitcher and fill it with hot water. Make sure the water is hot but not too hot.

If you are unable to touch the water because of the hotness then it is too hot and the effect of this is that it can cause damage to your tank reservoir.

2. Next, open your car bonnet and stand it with any available bar. After that, open the cap to the reservoir.
3. Take a cup of the hot water and gradually pour it inside the reservoir. Do this gently and slowly, allowing the water to sit in the reservoir for a couple of minutes.
4. Thereafter, get a turkey baster and use it to suck out the fluid. Throw away the fluid and repeat this step until you are sure that you have removed all the fluid.
5. Again, pour another cup of the hot water inside the reservoir and suck out the fluids with the turkey baster. Repeat this step until the tank is totally empty.
6. You will have to get some wiper fluid that is resistant to freezing temperatures. Fill your reservoir with this wiper fluid.

Note that the type of wiper fluid you should buy should be one that can handle temperature of about -20 to -25 Fahrenheit degrees.

7. You would then need to find the hoses that pass the fluid from the reservoir into the expenders that spray the fluid onto the windshield.

With the aid of an electric hair dryer, softly blow air over the hoses. Caution: To avoid melting the hose, do not blow the air on a particular spot for a long time.

8. Finally, start your engine and test that your spray washer fluid is working properly once again.

How To Prevent Windshield Washer Nozzles From Freezing

In preventing your windshield washer nozzles from freezing, it is necessary to note that your nozzles are most likely not shielded properly from outside water entry.

As a result, the water is entering into the nozzles, diluting the surface washer fluid and causing it to freeze.

In preventing your windshield sprayer frozen, you can always pour a bottle of rubbing alcohol into the windshield washer fluid reservoir.

This would help to prevent it from freezing and at the same time dissolve any frozen effects on the windshield.

You can always use a Fluid Booster also. However, make sure you purchase one that will not spoil the rubber hoses.

Another thing to do is to simply take off your windshield washer wipers and keep them indoors.

In fact, if they have frozen before being taken inside, they will melt in a couple of minutes.

After the ice melts off, blow through them and return them back to their position on the car windshield.

How To Keep Windshield Washer Fluid From Freezing

There are basically three effective ways of preventing your windshield washer fluid from freezing. Below are the tips to keep your windshield wiper fluid frozen:

1. Park your vehicle in a garage

In cases where you can predict that the weather is going to be very cold, it is advisable that you park your car inside the garage so as to prevent different components in your car from freezing.

This is because the temperature in your garage is going to be far warmer than the cold temperature that would be outside.

If it is possible to regulate the temperature in your garage, make it warmer. That would just be perfect.

However, even if you don’t have a mechanism to heat up your garage, you can be rest assured that the temperature in your garage would almost not drop to below 40 degrees, especially if it is attached to your house.

On the other hand, if it is detached from your house, we recommend that you consider installing a small heater so as to keep your car warm and in tact.

2. Provide heat for the fluid reservoir

Another method of preventing your washer fluid frozen, in case you don’t have access to a garage, is to provide a source of warmth or heat near the reservoir.

You can purchase some engine block heaters and attach it near your windshield washer reservoir so as to keep its temperatures regulated over the night.

You can always improvise by using any other form of safe heat source such as an incandescent light bulb placed beside the windshield washer reservoir.

3. You can always use freeze resistant windshield washer fluid

Our third tip to prevent your car windshield washer fluid from freezing is to buy freeze-resistant windshield washer fluid.

There are different kinds of windshield washer fluids and their resistance levels to freezing temperatures vary.

Always check your windshield washer fluid to ascertain whether it is certified as freeze-resistant or not. Caution:

Do not attempt to mix freeze-resistant fluid and non-freeze-resistant fluid as this will only raise the temperature at which the fluid will freeze which can cause damage to your reservoir system.

In case you have already poured in a windshield washer fluid that is not freeze-resistant, we recommend that you drain it out completely so as to pour a new freeze-resistant windshield washer fluid.

Conclusion on how to prevent windshield washer nozzles from freezing

In this article, we have explained to you how you can handle a frozen windshield washer fluid situation. However, it is totally advisable that you prevent this from happening in the first place, following our tips on how to prevent your windshield washer fluid frozen and windshield washer nozzles frozen.

I hope this windshield washer fluid frozen and what to do helped you? Please share if it did. and you can read this also How To Manually Roll Up A Power Window