How To Manually Roll Up A Power Window (Driver Side Window Won’t Roll Up)

Sharing is caring!

Last updated on June 8th, 2022 at 11:51 am

Are you faced with a power window repair issue and your car driver side window won’t roll up or maybe your car power window goes down but not up then I will show some quick fix for those? No matter how high or low your car window goes, experiencing a  stuck window can cause a lot of tension and havoc to the car owner. 

 And that is why, this post will show you how to fix a stuck car window generally, how to manually roll up a power window if your car automatic roll-up or electric window refuses to work, and what to do when your car power window goes down but not up spontaneously. 

Anyone can determine why your windows won’t roll up regardless of whether you have manual or power windows. Here are some tips to help you do this but before we get to the tips, let’s first get to know how a car window works. 7 Best Anti-fog Windshield Treatments & Anti Fog Glasses Cleaner

How Do Car Windows Work?

To roll up or down a car window, a regulator is what is used. Manual windows are equipped with regulators that can be physically connected to cranks. The crank is used to raise or lower the window. Although electric windows use motors to control their regulators, they work on the same principle. Because electric and manual windows have different parts, they can also fail for different reasons.

• Electric windows: To raise or lower the glass, electric car windows use a reversible motor and a regulator. And so, when the motor, switches, wiring and motor can all fail, and the regulator may also become stuck or malfunctionwhich in simple terms results in a power window that goes down but not up some times the revers is the case.
• Manual windows: To raise or lower the glass in a car’s windows, a hand crank is used and a mechanical regulator.The crank and regulator gears can wear, and the regulator may bend or deform. If the grease dries, friction can also cause the regulator to become stuck.

why will a car power window goes down but not up

Car windows can sometimes be complicated, especially if they’re electronic models and not hand-rolled vintage designs. There are many reasons your car window may not roll up or down properly, and these reasons can be due the following:

• The fuse is blown, which prevents the electrical controls that handle the window from functioning.  This is one the foremost reason why driver side window won’t roll up.
• And reason the driver side window won’t roll up could be due, the car child safety lock is accidentally activated.  

• Window motor malfunction. The window switch works properly. This can be identified by the “grinding noise” that is heard when the window switch is being pushed up or down.  

• Poor construction or voltage problems could cause the switch to fail. 

• A car door has been damaged or dented by an accident. It prevents the window’s roll-up, even though the motor is functional.  

• Another reason that a car window stuck down could be because a material such as snow and ice have blocked the window slots, which has prevented it from moving.  

Though there are lots of reasons your window might stop rolling up or in some cases stuck up and can’t wind down. However, you don’t need to panic. There are many solutions to this problem, just like there are multiple root causes and we are going to discuss that soon.  

Power Window Goes Down But not Up Diagnosis.

You should lookout for signs that the window motor is not working properly and to diagnose a car window that won’t roll up or down, you will need some special equipment. You will need to take out both the switch and the door panel in order to test everything. There are several things you can do before you go any further.

 Use your voltage gauge to check if your window motor has failed.  

A voltage meter is found on some cars. It will typically show 12 to 13 volts when the car is turned off. If the engine is running, it will show more. Although it is not exact, it gives a visual indication of whether the charging system works.

You may be able to use your dash voltmeter to diagnose a defective window motor switch.

      To activate the gauges and dash lights, turn the key to the car accessory position.

      Move your window switch.  

      Pay attention to check if the voltage meter’s needle moves.  

If your voltage meter moves even slightly when you push the window switch with the engine off and the motor on, it means that the electric window motor has failed to function. If your switch works fine, it is likely that the motor is defective.

Read this: How To Unfreeze Windshield Washer Fluid (windshield washer fluid frozen what to do)

The regulator could also be bent, broken or seized. You can only tell if the regulator is bent, broken or seized by removing the door panel and performing a regular inspection. You will need to hire a professional if you don’t have all the tools necessary to do this.

How to Check for Power at a Car Window Switch

Further diagnostics are not possible without specialized equipment or knowledge. It’s better to take your car to a professional mechanic if you don’t own tools such as a voltmeter or aren’t confident working on it yourself.

You can use a voltmeter to verify that the power window switch is powered and grounded. These switches typically have one power terminal, two ground terminals and two terminals that connect with the motor.

If your car’s switches follow this pattern, you will find power at one terminal if the switch is in neutral. The ground should be shown at two of the terminals, while the last two should not have power or ground.

Pushing the switch in one direction should cause one terminal to have power and the other one to have ground. The switch should be pushed in the opposite direction to reverse the order of which terminal has power and which one has ground.

Your switch may be defective if you get different results. If the switch doesn’t have power, ground or both, it is possible that there is a wiring problem. You should inspect the wiring that runs through the door. They can be crimped or broken and need to be checked first.

how to manually roll up a power window

The power window motor will stop when you roll it up. It then starts to rain. How are you going to get the power window up without getting soaked? There is an easy way to save your hair and upholstery.

Here is a power window wont go up quick fix

• Step 1: Secure the door to ensure it does not move on its hinges. Lean forward and open the door. The door will now be between you and the rest.
• Step 2: Hold the glass between your palms. You may not have much of the window visible, but at least you should be able grab it between your palms. Place one palm on the inside and the other on its outside. Your palms should be pressed together to grab the glass between your hands.
• Step 3: Gently and slowly move your palms up while holding the glass. Your palms should not slip on the glass.This may take some time, but eventually the motor gears will start to turn and the window will move up from your actions.

Push the window in the seal at the top. To seal the window, position your hands so that you are near the top of it. The glass should be held in place by the rubber seal at its top and the gear mechanism.

Is there a power window won’t go up quick fix

There is no quick and easy way to temporarily force a manual window that is stuck up, unlike power windows. Although you can pull the window in place, it may cause the problem to get worse.

You will need to take out the crank and door panel from your window in order to see why  it isn’t rolling up.

Pay attention to the way it feels when you turn the crank. The crank may have teeth that are missing if it does not turn smoothly or feels like it is grinding. Take the crank apart and inspect it visually. You can replace the crank if the teeth have been removed.

If the crank is in good condition, you can remove the door panel to inspect the regulator and window. Make sure that the window is not pushed out of its channel. You can roll it up if it has.

Sometimes, the grease may have dried out or the regulator could be stuck to something. These problems can be fixed by either removing the regulator or applying more grease.

how to get electric window up when stuck down

There are two ways that you can roll up a power window that has stopped working.  For in instance you depending on what the cause is based on above diagnostic problem you identified, If the switch is in good condition and the motor is not damaged, you might be able to get the power window to roll up by holding the switch closed or up. 

This is how to open a stuck electric windows without using any tools. 

1. The ignition key should be in the accessory or on position. If all windows work and the radio turns on, then you’ve got it in the correct position. 
2. Hold the window switch in either the up or closed position. You must keep the button down and push the side that closes your window. 
3. Keep the window button pressed. Open the door and close it. You can try it again if it doesn’t work first time. If it works, keep pushing the button. The window should open.  
4. You should not roll the window up unless you are prepared to fix the problem. This temporary solution may not work the second time. 
5. If the window doesn’t roll up after closing the door, find a spot where the door panel appears to be in contact with the sheet metal. 

You can find images online of cars with their doors removed if you’re unsure where to look. 

6. Press the switch. Now strike the location with your fist, or another blunt object. You must be careful not to damage your door or injure the switch. 
7. You can leave the window open until the problem is resolved. If the window doesn’t move, either check for a bad switch or fuse or take your car to a professional. 

The Window may be out of its track

If you hear the motor running or the window making a grinding noise when you roll it up, this could indicate that the regulator is not working properly. 

If the window isn’t completely down, you may be able to roll it up. 

1. Move the ignition key to the accessory position. 
2. Place your hands together, with the window between them, while the door is open. 
3. A helper can push the window switch. 
4. Use your palms to press the window open with your fingers and try to lift it up. 

To exert sufficient force, you may have to grab the window from the top. You may need to do so because the window might suddenly move on its own. As the window closes, be careful not to get your fingers stuck. 

If you feel the window sliding down and the glass is squeezing when you roll it up, the window will not close. You may be able to lift the window from the inside if you can remove the door panel. 

Sharing is caring!