Last updated on July 31st, 2023 at 09:07 pm
If you are in need of where to buy Loctite rearview mirror adhesive and other rearview mirror adhesive kit, then this post is your go-to guide, where we share with you some of our top rearview mirror adhesive kits
Rear view mirror is an extremely vital component of your vehicle since it helps you see objects that are behind. The rearview mirror in older vehicles is mounted on a pedestal that hung from a mounting point just above the windshield and secured in position by two or three screws.
However, in newer vehicles, the rear view mirror is usually hung on a bracket glued to the inside of the windshield. Vehicular collisions can lead to the damage of the outside and inside rear view mirrors. For the inside mirrors, it is usually attached to the windshield glass using a quick bond adhesive.
9 Best Rear View Mirror Adhesive: Top Rated Adhesive Kit Reviewed
The inside rear view mirrors are also susceptible to get knocked from the windscreen apart from collision damages. This is particularly applicable to old cars whose mirrors have been in place for ages. Fixing back an interior mirror is quite easy, all you need is the best rear view mirror glue.
What Kind of Glue Do You Use for a Rear View Mirror?
There are lots of bonding agents available in the market, but some are superior to others. Rear view mirror adhesive outperforms most types of super glue bonding ingredients. The most effective type to use is the rearview mirror glue products, such as 3M High Bond Rear View Mirror Adhesive.
Rear view mirror glue can perfectly bond the brackets of a rearview mirror to the windshield in a matter of seconds, and it would be a permanent hold. In fact, Rearview mirror glue is so effective that it can even be used to bond glass to glass and metal to metal.
Where to buy Loctite rearview mirror adhesive
Loctite rearview mirror adhesive
You can buy a Loctite rearview mirror adhesive online from Amazon store or you can go to your local car store to buy one. if you are buying from a store around you be sure it is a trusted product. and if you wish to buy Amazon please please read each of the reviews below. these are our top pick base on the rating and customer satisfaction.
Refitting a Rear View Mirror with Rear View Mirror Adhesive
Fixing a rear view mirror does not require any special tools, it’s quite easy, as long as you use a high quality rear view mirror glue and proper guidance. A well-equipped rear view mirror glue kit can be obtained from Amazon or from your local car parts shop.
You must ensure the kit is up to date and from a dependable brand.
Separating the Mirror
Two parts of your rear view mirror are connected through a ball joint. One part stocks the mirror glass, and the other part is attached to the windscreen, which is the mirror base. You have to first start by separating the two parts, failure to do this will make the mirror too heavy and will cause it to fall off long before the adhesive has had the chance to work.
Repair the Mirror Base
The next thing you should do is to:
- Sand the mirror base and the windscreen button by placing the metal disc on the windscreen, while ensuring they are absolutely smooth. You can do this properly by following the manufacturer’s instructions.
- Note that rough surfaces will inhibit the glue from making a resilient bond. Ensure you remove any dust and dirt from both sides to keep the surfaces smooth.
- Next, following the manufacturer’s instructions, apply the best rear view mirror adhesive to one or both surfaces. Press the two parts together and hold in place for as long as necessary.
- Hold the mirror base to the windscreen button, that is, the metal disc on the windscreen for as long as the instructions permit. You have to allow the rear view mirror glue to settle overnight before fixing back the mirror.
Refitting the Mirror
After the glue must have set from the steps above, you can proceed to refit the mirror to the base, which is now attached to the windscreen. Exercise caution so as to prevent breaking the mirror base from the windscreen. Try holding the base in one hand whilst pressing the mirror with the other.
Best 9 Rear View Mirror Glue Reviews for 2019
Starting from the Loctite Rearview Mirror Adhesive
1. Loctite Rearview Mirror Adhesive
This is a forte adhesive produced to permanently bond metal to glass. It emerges top as the best rated rear view mirror glue in our list. Loctite Rearview Mirror Adhesive is highly commended for bonding mirror and glass to metal, acrylic, aluminium, and Plexiglas.
Product Description
In colour, the Loctite 37438 is gleaming amber, while the activator is translucent green. It has an irksome, sharp odour that one may find disturbing, so it is best you should use it in an area with proper ventilation. The application temperature of Loctite adhesive ranges from 50 to 75 degrees Fahrenheit and the specific gravity for the adhesive is 1.05, while for the activator is 0.70. The adhesive is produced with a viscosity of 2100 to 3500 cps, while the activator has a viscosity of 2 cps.
For the adhesive, the flashpoint is greater than 200 degrees Fahrenheit, while that of the activator is 7 degrees Fahrenheit. The adhesive has a VOC content below 4% by weight and the typical service temperature ranges from -10 to 130 degrees Fahrenheit.
Application Procedure
No form of special skill is required for the application procedure. It only requires at least 1 minute to set the kit, 15 minutes for mounting, and about 24 hours for maximum curing strength. Be careful when using this kit because the adhesive is made up of the methacrylate ester and acrylic acid, which can irritate the eye and may cause an allergic skin reaction.
Precaution
The activator is highly flammable, and it is deadly if ingested. The activator contains hexane; therefore, it is an eye irritant. Never use the activator near an open flame, sparks, or heat. Ensure you keep the kit away from children.
Click this link: Loctite Rearview Mirror Adhesive Kit to find this product on Amazon.
2. 3M Rear View Mirror Adhesive
This is a structural acrylic kit that is invented to proficiently reattach rearview mirror. It comprises of methacrylate and isopropyl alcohol activator. 3M 08749 is extremely resistant to vibration, impact, moisture, heat, and chemicals when compared to most conventional products.
Product Description
In colour, the 3M 08749 adhesive is clear, and the activator is green. The odour of 3M Rear View Mirror Adhesive wasn’t stated by the manufacturer, but according to my experience, it is not totally pleasant. So, ensure you use it in a well-ventilated area.
The best service temperature of this adhesive ranges from 130 and 230 degrees Fahrenheit and has excellent low-temperature curing. It is resistant to thermal cycling, apart from being flexible.
Application Procedure
The application procedure is quite simple. This kit requires a few seconds for handling, 15 minutes for curing and about 24 hours for tensile strength. It works perfectly in humid environments and high temperatures.
Precaution
You need to exercise caution when using this adhesive because if used carelessly, it may cause:
- allergic skin reaction
- skin and eye burns
- severe complications in the digestive tract if ingested
It is a flammable vapour and liquid and ensures you refer to the products SDS and product label prior to usage. The 3M Rearview mirror adhesive has a shelf life of twelve months when stored at room temperature, which is the ideal temperature for storage.
Click this link 3M 08752 Rearview Mirror Adhesive to find this product on Amazon.
3. Versachem Rear View Mirror Adhesive
The Versachem 11109 Rear View Mirror Adhesive is another product that is very authentic and reliable. This exceptional glue is fast acting and extra strong and it outperforms super glue type and other bonding products.
Product Description
The composition of this very quality adhesive includes ingredients like maleic acid, t-butyl peroxy benzoate, 2-hydroxyethyl methacrylate, and isobornyl acrylate. In appearance, this unique adhesive is clear in colour and has a mild odour. Also, it has a boiling point/range of greater than 300 degrees Fahrenheit and a flash point of greater than 199 degrees Fahrenheit. It has a vapour pressure of 6 mmHg at 86 degrees Fahrenheit, the vapour density of greater than 1, and a relative density of 1.06.
Precaution
No data has yet been presented on the reactivity of this product which is quite stable under appropriate storage conditions. It has no possible lethal reactions when used under normal processing, however, exercise caution to avoid eye and skin contact.
The product may adversely irritate the respiratory tract if inhaled. If the product touches your eye, it can lead to irritation, tearing and redness of the eyes. It may cause dermatitis and/or skin irritation if it gets in contact with the skin.
Click this link Versachem 11109 Rear View Mirror Adhesive to buy this product on Amazon.
4. Rugged Ridge Rear View Mirror Glue
The Rugged Ridge Rear View Mirror Glue is a very potent adhesive that does permanently mount metal mirror buttons to windscreens in just a matter of seconds. The complete kit comes with mixing sticks, sandpaper, alcohol pad, and epoxy pouch.
Product Description
This remarkable adhesive is clear in colour and has a tensile strength of 3000 psi, which is quite outstanding compared to conventional products. Working time of about 1 to 35 seconds is required and takes about 5 minutes to reach 60% of full strength. It takes about 24 hours to achieve a complete cure.
Precaution
The Rugged Ridge Rear View Mirror Glue contains skin and eye irritants; so exercise caution when using to avoid harmful side effects. It has an unpleasant odour, so it is best to use the kit in a well-ventilated environment. You can use the kit to re-attach many materials irrespective of the possible safety issues.
Application Process
The application process is quite simple, all you need do is to properly adhere to the manufacturer’s instructions. Start by using the primer as instructed and then apply the glue for effective results. Ensure the sticker does not cover the instructions when purchasing the kit.
You can buy this product on Amazon by clicking this link Rugged Ridge 11021.01 Rear View Mirror Glue
5. Worktech Adhesives & Sealants Professional Rear View Mirror Repair Kit
This is yet another tough repair kit for a falling rearview mirror. The Worktech rearview mirror adhesive has the same chemical compounds as those used by auto manufacturers. This product offers excellent bonding for metal and glass.
Product Description
This product comes with a two-part mirror glue that permanently bonds your rear view mirror buttons to the windshield of your car. This high performing adhesive is easier to use unlike other adhesive and no special skill is required to achieve lasting results.
In colour, this adhesive is yellow and the activator is blue-green. The composition of the kit consists of methacrylate ester and the working temperature ranges from -60 to 200 degrees Fahrenheit. It has a flashpoint of greater than 200 degrees Fahrenheit. The odour mild viscosity of this adhesive ranges from 3000 to 5000 cps and it has a shear strength of 21.5mpa. The thermo-stability temperature is below 80 degrees Celsius and has an exact gravity of 0.98.
This unique adhesive requires 30 seconds of setting time, around 30 minutes for mounting strength, and approximately 24 hours to achieve the supreme tensile strength.
Caution
Exercise caution when handling this kit because both the adhesive and the activator can irritate the skin and eye. Ensure you use the activator before using the adhesive, and keep the kit away from the reach of children.
Buy this product on Amazon by clicking WORKTECH Adhesives and Sealants Professional Rearview Mirror Repair
6. Pro Seal Rear View Mirror Adhesive
Pro Seal Rear View Mirror Adhesive is a top-quality rear view mirror glue kit that attaches glass and metal in no time. The Pro-Seal 61067 is also capable of attaching metal to metal and glass to glass, apart from bonding glass to metal.
Product Description
It has a clear colour, and it’s chemical composition includes isopropyl alcohol and acrylate. It has a exact gravity of 1.12 / 0.79; a viscosity of 1000 to 2000 cps; and tensile strength of 600 psi. This exceptionally high tensile strength makes the Pro-Seal a tough rear view mirror adhesive.
Application Process
The application process is quite easy, and all that is required are the manufacturer’s instructions. It has a speedy setting time of 2 minutes and takes about 24 hours for a full cure. Its working temperature is about -65 to 250 degrees Fahrenheit, with a high solvent resistance and high thermal cycling capabilities.
Precaution
The Pro-Seal Rear View Adhesive is a potential skin and eye irritant, and a skin sensitizer, according to the manufacturer’s caution instructions. The activator is highly flammable and irritant to the eyes. Avoid direct eye and skin contact and keep away from reach of children.
Click this link to purchase this product on Amazon Pro-Seal 61067 Rearview Mirror Adhesive
7. Permatex Professional Strength Rear View Mirror Adhesive
The Permatex Professional Strength Rearview mirror adhesive is a two-part mirror glue that is perfect for bonding metal mirror buttons to windscreens. This product is not recommended for bonding plastic buttons. It is easy to use, OEM factory service specified, and fast curing.
Product Description
The adhesive has a yellow colouration, the activator is blue-green, while it comes with a mild odour. This adhesive is composed of methacrylate ester with a specific gravity of 1.13, and a flashpoint greater than 200 degrees Fahrenheit, and a temperature range of -60 to 200 degrees Fahrenheit.
Pemex adhesive can reattach rearview mirror to a windscreen permanently, but it is not effective for reattaching plastic buttons. It takes a few seconds to achieve superior handling strength. It takes approximately 15 minutes to achieve the best mirror mounting strength.
This rearview mirror repair kit is not to be used in oxygen rich systems, and shouldn’t be recommended for powerful oxidizing materials. Consult the safety data sheet of the product if you are not certain on how to use this product.
Caution
The Permatex Professional Strength Rear view mirror adhesive is dangerous and flammable as warned by the manufacturer. The kit contains chemicals that may be injurious if not used with care. Avoid direct eye or skin contact to avoid irritation and sensitization.
You can buy this product on Amazon by clicking this link Permatex 81844 Professional Strength Rearview Mirror Adhesive
8. Dynatex Rear View Mirror Adhesive
This is tough adhesive system comes with medium viscosity and provides excellent tensile strength for exceptional bonding performance. The Dynatex rearview mirror adhesive will not peel under pressure and it is made for quick and effective curing. In colour, the adhesive is amber, and the activator is green.
Product Description
The uncured properties of Dynatex rearview mirror adhesive have a viscosity of 30,000 to 40,000 cps at 2 RPM; specific gravity of 1.05; a flashpoint of greater than 200 degrees Fahrenheit; and moderate toxicity. The curing properties include the tensile shear strength greater than 2500 psi and a thermal service range of -60 to 125 degrees Fahrenheit.
When used along with the activator, the Dynatex 49401 Rear View Mirror Adhesive takes about 40 seconds for fixing. The curing process ranges from 5 to 15 minutes and may take about 24 hours for the adhesive to achieve its full tensile strength.
The fixture time depends on the gap between the parts you are attaching and the temperature. Larger gaps may need more time for superior curing.
Caution
This product is low to moderate in toxicity, so it is best to use this product with caution. The adhesive can cause skin and eye irritation. The activator is highly flammable, avoid using it near flame or heat.
You can get this product on Amazon by clicking this link Dynatex 49401 Rear View Mirror Adhesive
Gorilla super glue rear view mirror
9. Gorilla glue rear view mirror
Gorilla 2 Part Epoxy, 5 Minute Set
Gorilla glue rear view mirror Adhesive is a top-quality rear view mirror glue kit that attaches glass and metal in no time. The Pro-Seal 61067 is also capable of attaching metal to metal and glass to glass, apart from bonding glass to metal.
Product Description
This offers a strong, permanent, fast glueing. Great for numerous surface mirror applications
The best glue for tough repairs that is requiring a durable bonding and gap-filling and solvent resistance Ideal for easy and clean finishing
Application Process
The application process is quite easy, and all that is required are the manufacturer’s instructions. It has a speedy setting time of 2 minutes and takes about 24 hours for a full cure. Its working temperature is about -65 to 250 degrees Fahrenheit, with a high solvent resistance and high thermal cycling capabilities.
Precaution
The Pro Seal Rear View Adhesive is a potential skin and eye irritant, and a skin sensitizer, according to the manufacturer’s caution instructions. The activator is highly flammable and irritant to the eyes. Avoid direct eye and skin contact and keep away from reach of children.
Click this link to purchase this product on Amazon Pro-Seal 61067 Rearview Mirror Adhesive
You will surely love this gorilla super glue rear view mirror if you buy it
Factors to Consider Before Buying a Rear View Mirror Adhesive
The market is filled with lots of rearview mirror adhesives, and not all may be effective as the adverts claim. Most people find it difficult to make the best buying decision. Now, apart from products I have reviewed above, I have also taken time to prepare the list of factors to consider before buying a rearview mirror adhesive.
Rear View Mirror Glue Temperature
When selecting a rearview mirror adhesive, go for the one that has excellent low-temperature curing. This type should be flexible with outstanding resistance to thermal cycling. From experience, the best product is one that has a working temperature range of -130 to 230 degrees Fahrenheit.
- Quality
You should buy a rearview mirror glue kit that will give the best results when working on your vehicle’s rearview mirror. This will ensure that the glue holds properly for safety reasons. Therefore, go for a high-quality adhesive that can bond metal to glass. This type would be ideal for refitting a rearview mirror to a windscreen.
- Resistivity
The finest rearview mirror adhesive must be resistant to heat since the windscreen of your vehicle may be exposed to direct sunlight for long hours when driving or parking. The glue may not hold if the adhesive is not heat resistant, thereby causing it to detach from the mirror. The bonding may be exposed to bumpy roads, vibrations, humidity due to rain or moisture, accidental knocking and others. So it is best to choose glue with good resistivity that will be able to withstand all the factors.
- Dryness
Go for ideal products that take a maximum of 24 hours to produce superb bonding results. Do not settle for a model that will take a longer or shorter time to dry. You can use a hairdryer to accelerate the drying process. It is best to go for high-end models that have a good reputation for quick drying. I would advise you go an adhesive that has a 10-second handling strength, 2 minutes full strength, and 24-hour full cure.
So this is where we rap it up on this post on BEST SUPER GLUE REAR VIEW MIRROR ON AMAZON and gorilla super glue rear view mirror. I hope you like it? Please share.
