Last updated on July 13th, 2023 at 04:51 pm
In this post, we are looking at how to fix electronic throttle control and how to reset electronic throttle control manually. The Electronic Throttle Control (ETC) is an essential part of your car. It is a technology that connects different parts to ensure the smooth running of your car. Like other parts of the car, the electronic throttle control needs to be serviced and maintained.
And in this post, we are going to see a way to reset and to fix a bad service electronic throttle control ram 5500, ram 3500, and ram 2500 read this too Reset steps for Electronic Throttle Control for Chrysler 300,200 & Ram 1500. To help you know how to maintain, reset or fix the service electronic throttle control, in this article I will be telling you how to fix a service electronic throttle control, what a service electronic throttle control means, and how to reset the service electronic throttle control.
Before going further, let me tell you the meaning of service electronic throttle control, and later I will show how to service the electronic throttle control.
Servicing the electronic throttle control involves having the electric throttle body cleaned by removing any dirt that has found its way into it. To avoid experiencing any throttle control problems, this clean-up is necessary. You can have your mechanic clean it whenever you take your car for routine maintenance and servicing. For an electronic throttle control, I will advise that you let a certified mechanic carry out the cleaning process. So now let see how to fix electronic throttle control
What Does Service Electronic Throttle Control Mean?
For you to be reading this article then you must have heard of the electronic throttle control. You start your car every day by inserting the key, turning the ignition, shifting the gear, and then pressing the pedal, but have you ever wondered what makes the car move when the pedal is pressed? It is the Electronic Throttle Control that makes it possible.
The Electronic Throttle Control is a technology that links the gas pedal electronically to the throttle. There is no cable connecting the throttle to the pedal but there is a transferred signal that is understood by the throttle once that pedal is pushed. The Electronic Throttle Control is a system that is made up of three parts: the accelerator pedal, the throttle valve, and an engine control module (ECM).
These three parts or components have individual functions that affect the performance of the vehicle. The accelerator pedal has two or more car sensors and the throttle valve is electrically operated by a motor called the electric throttle body. This electric throttle body is the engine control module (ECM) and it is also known as the powertrain control module (PCM). It is software that uses the data measured by the sensors. You might love this post too Steps to Calibrating a car Throttle Position sensor of your vehicle.
Service Electronic Throttle Control
A lit electronic throttle control light is an indication that there is a problem. The sensor is telling you that a replacement or resetting has to be done. To know exactly what to do thoroughly follow the steps below.
Step 1: Diagnose the Vehicle
To be sure of the exact problem, check your vehicle for any trouble codes and get them fixed. Also, check your Powertrain Control Module system for faults. Then check the engine of the car for any air leakage. Likewise, check the filter cap seals, PCV system, and dipstick for faults.
If everything is in order, then proceed with the resetting process. But if the codes relate to either wrong idle speed, air circulation sensor, pressure in the exhaust, or lit engine light, do not reset your Electronic Throttle Control.
Step 2: Regulate the Temperature
Regulate the temperature of your vehicle to the normal functioning temperature. Proceed to check that the ignition timing is in accordance with the manufacturer’s recommendations. In order not to overload the engine and affect the position of the throttle plate, put off the air conditioner, radio, rear window defogger, and heater. Finally, place the front wheels on neutral and ensure that why are facing straight.
Step 3: Fully Release the Gas Pedal
Proceed to reset the throttle control by first releasing the gas pedal of any pressure. To do this, turn on the ignition for not more than 2 seconds before turning it off for 10 seconds. Ensure that you do not ignite the engine. Turn on the ignition again for another 2 seconds and then turn it off again and wait for another 10 seconds. This is to signal the computer system of your vehicle of the open and closed position of the gas pedal.
Step 4: Turn on and off the Ignition
Turn on the ignition for 4 seconds. Immediately you turn it off, press the gas padel for times and release it after 5 seconds. Relax for about 8 seconds and then press down the gas pedal for about 20 seconds. This should stabilize the fluctuating engine check light and keep it on. After the light becomes stable, remove your foot from the gas pedal exactly 3 seconds after.
Step 5: Allow Engine to Idle
When all the above-mentioned have been done, start your car’s engine and allow it to idle for few minutes. Within a space of 20 seconds rev the engine severally. This is to ensure that the idle speed is within the manufacturer’s recommendations.
If after all this you are not successful, you will have to repeat the process. Turn off the car for about 60 seconds and try again. If you are successful, then the procedure is complete and you are done.
How to Fix Service Electronic Throttle Control and how to reset electronic throttle control manually
If regularly serviced, an Electronic Throttle Control can serve you for a really long time, even throughout the lifespan of your car. If the electronic throttle control light comes on when something went wrong along the way. It might not be a major problem that demands that you replace the electronic throttle control. You might just be required to clean and reset the throttle body. If resetting doesn’t work then you will need to replace the throttle control as it has gone bad.
6.7 cummins service electronic throttle control reset
Where you like to go the route of the throttle control reset, then there are two ways you can do it.
This reset can be applied to service electronic throttle control ram 5500, Service electronic throttle control Ram 3500, and service electronic throttle control ram 2500.
service electronic throttle control reset
- Use an Alfa or WITech to run the codes and reset them.
- Reset it manually by first removing all the pressure in the gas pedal. Start the car and let it run for some seconds then turn it off. This should reset it.
How To Replace A Bad Electronic Throttle On Your Car
When you are looking at how to fix electronic throttle control besides resetting it, then it comes down to replacing the service electronic throttle control be it for ram 5500, ram 3500, or ram 2500.
So where you have to replace the throttle control, follow the steps below and also watch the video above for more practical visuals.
- To start remove the air dust and then lose the throttle clamp and unfasten it.
- Unplug the electrical connection and then use a screwdriver to pry it and remove it.
- Loose the four bolts that hold the throttle and then remove the throttle.
- Place the new throttle where you removed the old and bolt it.
- Replug the electrical connection and fasten it into place.
- Replace the air duct and tighten the throttle clamp.
- Reset the throttle control using one of the two methods above.
I hope this article on service electronic throttle control was helpful? If benefited from it please don’t hesitate to share it and also bookmark this page for feature reference.
Related Article:
