2014 Subaru Forester Oil Capacity, Oil change & Reset Of Oil Light

But many negative issues could arise due to low oil; hence, it is advisable to know your oil capacity, change it, and reset the oil light when necessary.

Nevertheless, relax as this article will bring to lamplight the following contents; what is the 2014 Subaru forester oil capacity, easy guide on 2014 Subaru forester oil reset, how do you reset the oil light on a Subaru Forester, how do you reset the maintenance light on a 2015 Subaru forester, how much oil does a 2014 Subaru forester take and more. Are Subaru Brats Reliable?

Benefits Of Oil Change And Reset In Your 2014 Subaru Forester

Let’s look deeper into the importance of changing the oil and resetting oil for your 2014 Subaru forester.

It Enhances The Subaru Forester Engine Discernable: Oil picks up dust and debris and carries them to the filter where they become trapped, reducing the risk of dirt accumulating in the engine and causing damage to the engine. In essence, it increases engine efficiency.

Improves Fuel Efficiency: If the engine components are slippering, then a fewer force and a fewer fuel are used by the engine.

Prevents Engine Knocking: Although engine parts like pistons don’t have contacts, it is essential to provide and stop them from touching each other and as much stop knocking.

Prevents Corrosion: Additives in most contemporary oil make it easy to reduce oxidation and avoid corrosion.

What Is 2014 Subaru Forester Oil Capacity?

The 2014 Subaru forester holds an oil capacity of 5 to 8 quarts. However, this capacity depends on the engine size and the type of oil. For instance, a 4-cylinder passenger Subaru forester will take less oil and use conventional oil than a high-performance Subaru forester V-8 engine, which might use a full synthetic oil. In essence, a 4-cylinder possibly requires 5quarts, and a 6-cylinder will need 6 quarts of oil. What then is the advantage of synthetic oil over conventional oil in Subaru forester? Synthetic oil is a chemical compound, and the formulations allow the creation of this oil to provide more protection, higher oil viscosity index, more excellent resistance to corrosion and thermal breakdown, and reduces sludge problems than conventional oil.

2019, 2020, 2021 Subaru Forester Oil Capacity

2013, 2014, 2015, 2016, 2017, 2018 Subaru Forester oil capacity

2009, 2010, 2011, 2012 Subaru Forester Oil Capacity

2003, 2004, 2005, 2006, 2007, 2008 Subaru Forester Oil Capacity

1997 1998 1999 2000 2001 2002 Subaru Forester Oil Capacity

What happens if you don’t have your oil changed?

It is not a good idea to exceed your vehicle’s recommended oil change interval. You could end up with your car in great trouble if you exceed the recommended oil change mileage. Your oil will become clogged as dirt and particles are constantly introduced to it. Oil will get thicker and more sludge-like. This will cause more wear to your engine than usual.

Oil is more than a lubricant for the moving parts of your engine. It also contains detergents and other rust-preventative chemical ingredients. These chemicals will eventually wear out if you don’t change your oil regularly. This can cause an excessive buildup of dirt that will prevent your oil from properly lubricating your engine parts.

Oil lasts for a good amount of time so if you don’t get your oil changed on the recommended date/mileage, it won’t damage your car. You should ensure that this is done by the recommended date or mileage.

Easy Guide On, 2014 Subaru Forester Oil Reset

If the preset maintenance time arrives, there will be a notification display on the screen, so you must cordially correspond to the reset item’s setting after you have performed an oil change in your vehicle. Though for the 2014 Subaru forester, the easy way is below, and the procedure might take about 6 to 8 minutes;

• Don’t start the engine but place the ignition in the ON position.
• Choose the selection screen by using up and down signs.
• Enter the menu by holding the set button for about 3 seconds.
• Click on MAINTENANCE
• Also, click SET when you finish the setting.

How Do You Reset The Oil Light On A Subaru Forester?

To reset the oil light / To reset the maintenance light on your 2012 – 2016 Subaru forester, the procedures below are vital for a successful reset.

Step 1: Set your gearbox to park position and close all doors

Step 2: Don’t start the engine but turn on the ignition.

Step 3: Use the navigation button at the side of the steering wheel as you press ENTER/SET.

Step 4: Press the ENTER button to settings and scroll for MAINTENANCE.

Step 5: Select the ENGINE OIL and press ENTER/SET button.

Step 6: Set interval in DATE or MILES for the following oil change, then scroll to find the SET button and press ENTER/ SET.

Step 7: Put off the ignition as you start the engine to check the reset of the oil light and its reminder.

How Do You Reset The Oil Life On A 2016 Subaru Forester?

The procedure to reset the oil life on your 2016 Subaru forester is the same procedure for the 2014-2016 Subaru Forester models. However, all you need to do is toggle on the steering wheel with your display screen. So here are the steps.

1. Make sure your ignition is ON.
2. On your screen, pull and hold the SET button.
3. Pull and hold the SET/i button.
4. Click and select MAINTENANCE.
5. Click Engine Oil, Filter Oil, or Maintenance Schedule.
6. Set the interval for your Oil life.
7. Click on SET to complete your reset. 

How Much Oil Does A 2014 Subaru Forester Take?

A 2014 Subaru forester takes 4.4 to 5.4 quarts of oil. However, it could require a synthetic oil for proper functioning since the oil is vital to reducing wear in the internal components to maximize engine life and maintain high fuel economy. Hence, it is necessary to change the oil every 6,000 miles at maximum for the 2014 Subaru forester.

How Do You Reset The Oil Life On A 2014 Subaru Legacy?

Resetting the oil life of your 2014 Subaru Legacy includes the easy guides below;

• Turn on the ignition and don’t start the engine.
• Click on the CAR INFO on the screen of the multimedia system.
• Select the MAINTENANCE.
• Click on engine oil
• Select and set for Date/Distance for a reminder.
• Click on SET
• Close the menu
• Finally, turn ON the engine to check your service reminder.

How Do You Check The Oil On A 2015 Subaru Forester?

Indeed, checking your oil can be rewarding and enjoyable since it pays to prevent damage than repair it. Using the necessary tools and parts, you can effectively and efficiently check the oil on your 2015 Subaru forester. Do study the procedure below;

• Park your car on a level surface.
• Pull the dipstick out.
• Clean the dipstick with a neat towel.
• Insert the dipstick as it is fully seated.
• Pull it out and check the oil level (you could do this at least twice).
• Check the dipstick where it reads your engine oil’s low or full level. You are good to go if you can find the oily section between these levels. Otherwise, I recommend you follow your manufacturer’s guide or consult an expert to change the oil.

How Do You Reset The Maintenance Light On A 2015 Subaru Impreza?

To reset the maintenance light for a 2015 Subaru Impreza require you to follow these instructions;

• Put the ignition in one position before starting the engine (turn the ignition on but not the engine).
• Use the control on the left-hand side of the steering wheel to pull the SET button on the selection screen.
• Highlight the MAINTENANCE menu and click on the i/SET switch.
• Click on the MAINTENANCE item (Engine oil, oil Filter) and pull the SET switch.
• Change the next service date and interval as well. Confirm as you select SET to complete your setting.
• Start the engine as you turn off the ignition. 

How Do You Reset The Oil Life On A 2017 Subaru Forester?

The procedure below is mainly for Subaru forester’s 2017 to 2018 models due to their technological build-up, which differs from other models.

• Place the ignition on but don’t start the engine.
• Go to SETTINGS using access buttons
• Click the ENTER button.
• Click MAINTENANCE
• Click on MAINTENANCE SCHEDULE or ENGINE OIL and make your settings.
• Click on SET.

How Do You Reset The Oil Life On A 2015 Subaru WRX?

To reset the oil life on your 2015 Subaru WRX is necessary for you every time you have an oil change. So far, if you don’t reset the system, it will be impossible to track or know when your next oil change is due. Endeavor to follow the steps below to reset the oil life checker after each oil change.

1. The ignition should be in the RUN position.
2. On the selection screen, pull the i/Set switch.
3. Highlight MAINTENANCE and pull the i/Set switch to yourself.
4. Click on the maintenance item to reset as you pull the i/Set switch.
5. Check on the service date and interval and highlight the i/Set switch to yourself.
6. Reset will be complete when SETTING COMPLETE is on the screen.
7. Turn off the ignition.

Does Subaru Have An Oil Change Light?

Of course, yes, but it depends on your Subaru model. This oil change light will come on when there is a low oil level; an indicator light will illuminate. When this light comes on, if not low oil, something could be wrong with your engine lubricant; before you waste your time checking more complicated parts of the engine, do start with your dipstick, as your vehicle may be low on oil due to a linkage hose or any other factor. Remember that the mileage range for changing the oil in your Subaru is between 3,000 to 7,000 miles.

How Do You Reset The Maintenance Light On A 2015 Subaru Forester, 2014 and 2013 Subaru Forester?

Perform the following steps on your 2015 Subaru Forester, 2014 and 2013 Subaru Forester. These steps can also be applied to other years of Subaru Forester.

Oil Change Light Reset Subaru Forester 2013,2014 & 2015 Procedure

1. Move the ignition switch to “RUN”.  
2. To display the selection screen, you must pull the i/Set switch toward your side.  
3. To highlight Maintenance, use the up and down arrows. Then pull the i/Set switch in your direction.  
4. Select the maintenance item and pull the i/Set switch towards yourself.  
5. The up and down arrows can change the next service date or interval. After you have confirmed, highlight “SET” and pull the i/Set switch toward you.  
6. For any other items that need to be reset, repeat the process.  
7. When “SETTING COMPLETE”, is displayed, the rest is done. 
8. Turn off the ignition.

How Do You Reset The Oil Light On A 2013 Subaru Forester?

1. Turn the ignition switch to “RUN.”
2. Next, you need to move the i/Set button towards you. This will display a selection menu screen,
3. Use the up-and-down arrows to highlight Maintenance. 
4. Next, pull the i/Set switch.
5. Choose a maintenance item and pull the switch towards yourself.
6. The up and down arrows can change the service date or interval. Once satisfied, click on “SET” to bring the i/Set switch towards you.
7. Repeat the process for any other items that require a reset.
8. Once “SETTING COMPLETE” is displayed, all else is done.
9. Switch off the ignition.

Conclusion

It is vital to follow the oil change interval (between 3000 to 7000 Miles or at least 6 Months) primarily according to your vehicle’s maintenance guide where the specific mileage and time you should change your oil and your oil filter as well. So far, it is responsible and efficient to adhere to the reset oil light in your vehicle when the need arises. To this, it’s crucial to do all the needful since maintenance benefits are so high to overlook. In essence, I have highlighted the procedures and steps to reset oil life and maintenance lights in various models of Subaru vehicles. Perchance, the resets and maintenance steps are the same in some cases. Nevertheless, I am hopeful this article is informative to you. Do like and share this post with others!

Jeffery Ekweghi

Hi dear, my name is Jeffery Ekweghi, and I am a certified mechanic and autobody parts technician. I created this site to share my expertise and experience with car lovers looking to resolve their car-related issues. I am certified in private cars and heavy-duty commercial vehicles. I have worked as a mechanic since 2015 and have experience in vehicle brands like Subaru, Jeep, Toyota, TATA, BMW, Mazda, Honda, Nissan, Kia, TVs, and Others; however, I primarily specialize in Toyota vehicles.

Sharing is caring!