How to remove power steering pump pulley without a puller

Last updated on July 31st, 2023 at 09:06 pm

Driving like all other activities requires enabling environments and sometimes equipment. To drive you need a car which has the right components for locomotion. This components include the brake system and the throttle system. You have the gear box to guide acceleration and direction, the steering wheel to guide the wheels on the road, the brake pedal to slow down the car to avoid collision. The steering wheel have their own individual components which includes the control arms and bushings. All these come together to make a car functional and ready to go. Read this on some of the best pulleyto get for your car

Without the steering, a car will have no direction. The steering pump helps maintain the integrity of the steering. You would not want to drive a car that tilts to fast to either the left or right. The steering has to be fluid in order for a driver to have the best experience. This is what the steering pump is all about. If you steering is slightly or completely off, don’t forget to have a mechanic check it out as soon as possible. Your safety is more important than your punctuality.

In this article we will be exploring; how to remove power steering pump pulley without a puller, how to remove power steering pulley bolt, how to remove power steering pulley without a puller and how to remove harmonic balancer without a puller.

The power steering pump is an essential part of every vehicle. It is what the brake fluid is to the car brakes. Because the vehicle is largely mechanical, it requires all sorts of lubricants t run without stopping. The steering pump affects the engine of the car, it works with a pulley. When the pulley wears out, the pump will cease to rotate and you will start to lose power steering. To fix this problem you will have to take the pulley off the pump and install a new one.

How to remove power steering pump pulley without a puller

So, can you remove the power steering pump pulley without a puller to support it? The answer is yes. However, if you can afford the puller, you should never go for this. The pulley is fastened securely to the power steering and therefore, if there is If there is a miniscule amount of giving, the speed at which at which the pulley moves, this giving can destroy the parts involved.

This means that attempting to remove the pulley without a puller can cause damage to the pulley. It can also damage the pump and is therefore an expensive endeavor. If you insist on doing this despite all the things that can possibly go wrong. Here is how to do it.

Use a vice and a piece of metal pipe to tap the wedge between the pulley and the pump
Heat the center of the pulley with a blow torch and pull it off.
Use a hammer to hit it from the back to dislodge it.

Sounds like a lot of work though. The task is both stressful and risky. A lot of things can go wrong. The alternative is to remove the pump pulley using a $20 puller that is both safer and easier to use.

How to remove power steering pump pulley with a puller

Here are the steps to follow;

Take the threaded bolt and connect it with the small lug below it.
Adjust the puller to grab the pulley securely.
Ensure the nut is not spinning.
Then pull until the steering pump is removed from the vehicle.

How to remove harmonic balancer without a puller.

Here are the steps to follow;

Remove the belt to access the harmonic balancer
Remove the center bolt and pulley.
Carefully remove the harmonic balancer
Inspect the harmonic balancer for damage or wear.

Some cars have different ways of arrangement inside. For some cars after you have removed the serpentine belts, you then remove the water pump noting where each bolt came from. You have to remove the hoses attached there before using a gear puller to remove the harmonic balancer. The gear puller can actually be rented at most auto part stores so you need not to own one yourself.

The reason why the power steering pump is so important is because of the role it plays in the car’s direction. If the car wheels are not properly aligned to the road, you can swerve off and collide with a person or another car. These scenarios can lead to death or serious injuries.

After reading this article I am confident that now you know how to remove the power steering pump pulley with or without a puller. Just remember that you can always invite a mechanic to help out, especially if you haven’t gotten the hang of using the puller.

Of course, I already said removing it without the puller is a bad idea, so if you tow that path and damage the pulley or the steering pump, you had better bring out your wallet if you want the car to ever move again.

One good way to avoid all these challenges and not have to read and understand engineering instructions is to take your car for servicing regularly. Another way is to drive on only good roads. Bad roads have a very bad effect on cars. It affects your break systems, your throttle systems and your shock absorbers.

The more terrible the road is, the more the wear and tear of many car components that eventually add up to a lot of money to fix. A third way of preventing all the hassle is buying a brand new car.

When you have a new car, it takes a while before you start to worry about all these hassle. If you have a new car and you service it like every two months, you may never even have to worry about it at all. What to read next.