Lexus Check Engine Light

Lexus Check Engine Light Guide & How to Reset Check Engine Light Lexus rx300

Sharing is caring!

Last updated on August 1st, 2023 at 08:04 am

How to Reset Check Engine Light Lexus rx300

Have you noticed that some engine or emission-related issues that trigger a yellow check engine light to come on or illuminate on the dashboard of your Lexus car? this post is a full detailed guide on How to Reset Check Engine Light Lexus rx300 and other lexes models like Lexus is250, es 350, and even Lexus rx330 plus others.

Lexus is a luxury brand of Toyota. Toyota cars are renowned for their reliability, high-tech, and high-quality. However, just as with most Toyota brand, Lexus also comes with some extra intricacy, meaning these models are not completely 100% trouble-free.

Apart from the light engine light or service engine light coming on your dashboard, the cruise control TRAC OFF or a VSC light can equally come on. Related to this post is the post on Service StabiliTrak light meaning and fix/reset.

Lexus Check Engine Light Troubleshooting Guide & How to Reset Check Engine Light Lexus rx300

In this article, we will discuss some common problems that causes Lexus check engine light to come on and ways you can read the Lexus Diagnostic Trouble Codes (DTC) using an OBD2 scanner.

We would also be looking at ways you can troubleshoot the following:

  • Check vsc lexus is250
  • Lexus is250 check engine light and traction control
  • Lexus vsc light reset
  • Check vsc lexus es 350
  • vsc light lexus rx330

What is the Meaning of Lexus Check Engine Light?

When the Lexus check engine light comes on, it means that the On-Board Diagnostic (OBD) system has sensed a fault. Problems with the check engine light could vary from simple to complex or severe. It could mean a loose gas cap or a more tasking problem like bad spark plugs, bad VVT solenoid, catalytic converter or even transmission issues. 

For you to identify the Lexus check engine light, you can use an OBD2 scanner to detect the fault code stored in the OBD computer. The fault code helps to give clues as to why your Lexus check engine light is on. 

Related Articles:

Common Symptoms of Lexus Check Engine Light

You may notice that your Lexus is misfiring or overheating, but there may be no symptoms at all in some cases. Symptoms that you will notice when your Lexus check engine lights remains on include: 

  • engine not starting
  • rough idling
  • TRAC OFF, VSC light on
  • poor acceleration
  • engine shakes at idle
  • rough shifting

What do you do when your Lexus check engine light comes on? 

We recommend checking a few things before you continue your journey when your Lexus check engine light comes on. Things to check includes:

  • Check the gas cap, and if you notice it is loose, tighten it until you hear a click sound. It can take about one week for the engine light to reset on its own once you tighten the gas cap. Alternatively, you can reset it yourself using an OBD2 scanner.
  • Check engine oil level by turning off the engine and waiting for at least 15 minutes before opening the hood. After this, pull out the dipstick and wipe it clean. Reinsert the dipstick and remove it again to take the reading of the engine oil level. Ensure that the level lies between the Min and Max marks. 
  • You should allow the engine to cool down before checking the level of the engine coolant. 
  • Always monitor warning lights and engine temperature. Stop driving if the check engine light is flashing, the oil light comes on, or the engine is overheating. 
  • Always read Lexus engine fault codes using an OBD2 scanner soon as possible.

Some car owners complain of not being able to read the Lexus Check Engine Light fault codes. See instructions on how to read it below.

How to Read Lexus Check Engine Light 

Now let’s look at how you can read Lexus check engine fault codes, also known as Diagnostic Trouble Codes or DTC using a generic OBD2 scanner.

  • Try to locate the OBD2 port under the dashboard and plug in your OBD2 scanner
  • Put on the ignition but don’t start the engine
  • Allow your OBD2 scanner to come on and communicate with your Lexus 
  • Select Read codes from the main menu.

Fault codes will appear on the OBD2 scanner. What you should do is to write down all the codes and carry out further research to recognize what they mean and learn about likely causes. You have to reset Lexus check engine light by going to Clear Codes menu after the problem has been resolved. 

Fault codes may give you a very good idea of what it is wrong with your car, we recommend you get a professional auto mechanic to properly diagnose the check engine light before you proceed with any part replacements. 

Check VSC Lexus is250 Light

If your Check VSC Lexus is250 light come on, you may start noticing that the engine felt like it would shudder, almost like it wants to cut out. This could be happening very sporadically but with more frequency as the warning lights go on.

Now, from my experience, the VSC shuts off due to lots of causes with most having nothing to do with VSC. The purpose of the VSC warnings is to get your attention. I’ve had the VSC warning on my LS perhaps four or five times including when the car was still under its rudimentary warranty and there was never a time the problem was with the VSC.

One of the most unusual causes of VSC Lexus warnings light coming on has been from a loose gas cap or faulty gas cap gasket.

They don’t need to call Lexus corporate to diagnose a problem like Check VSC Lexus is250 light coming on. You may just need to consult a mechanic.

How to Reset Check VSC Lexus is250 Light

There have been a whole lot of updates on the check VSC Lexus is250 warning light. If your (2007) IS250 car starts and stops with a shudder. If it stalls and the check VSC, traction control and Engine lights came on, then you will need to reset the light. In most cases, the car will still be running fine but the lights still come on.

Follow the tips below on how to reset Check VSC Lexus is250 Light:ong>

  • Drive car to full operating temperature. You want to evaluate the difference resetting the computer makes on the response, so you want to leave everything else constant – such as engine temp. Pay attention to any idle vibration you feel in gear.
  • Power off, and remove the negative battery cable (10mm socket required). Leave off for 10 minutes or so. I discharged the system completely by pressing the brake pedal.
  • Reconnect negative battery cable
  • Restart and drive.

How to Reset Lexus is250 check engine light and traction control

You should note that you cannot just reset the engine light and traction control on your Lexus is250. This is because they indicate a DTC (Diagnostic Trouble Code) which means a component failure or malfunction. You can reveal the trouble code by plugging a diagnostic scan tool into the OBD II data port.

The check engine light is due to the VSC TRAC fault, which is linked to the traction and stability control. It could be caused by something as easy as a dirty wheel speed sensor or failure of a more expensive component. You can go to a parts store and scan it for free.

However, since this will only be a basic scan, it will only provide the DTC recorded in the PCM (Powertrain Control Module) which is a starting point. A commercial grade scanner like those at dealerships and professional repair shops can diagnose deeper into the PCM to reveal very detailed information related to the fault. The Lexus electrical components are reliable so your issue is not likely a major problem.

I recommend that you should scan the check engine lights as soon as possible because the failure of an inexpensive part such as an oxygen sensor can change fuel ratios thereby leading to a more severe damage to the catalytic converter which is quite expensive to fix.

How to Reset the Lexus VSC Light

Resetting the VSC light shouldn’t be hard if you have a scan gauge. You can switch on the engine to ACC and long-press the odometer so it reads the actual mileage. Then completely switch off the engine and turn it on again but this time pressing the odometer button. Doing this should help clear the VSC light.

If after completing the above steps it still does not work, then it may indicate problems with the wheel sensors that relay information to the onboard computer. The sensors get worn out with time. It is best to read the trouble codes from your car using an OBD2 scanner so as to make troubleshooting easier.

How to Reset Check VSC Lexus es 350 Light

Your VSC Lexus es 350 light will come on whenever you have a check engine light on. The best way to resolve this issue is to take your car to an auto mechanic and have them scan your car. Your car should still be under factory warranty, so any repairs may cost you nothing.

From my experience, a 2007 es 350 with a check engine light is mostly caused by a faulty air-fuel sensor or a loose gas cap. So, check if your gas cap is fully ratcheted, and drive for a day or two. If the lights don’t clear you will need a code reader attached to the car to diagnose the issue. Also, your mechanic should check the ABS computer because it can be damaged in some cases.

How to Reset Check Engine Light Lexus rx300

please watch this

Conclusion

The Lexus check engine light has numerous causes and meanings. Lexus cars are known to trigger other warning lights such as VSC, Traction Control and other warning lights when the CEL comes on.  When this occurs, you should address the check engine light first, since doing this will often reset the other warning light.

It could point to a very serious problem or it could just be a broken-down sensor. Ensure you get your vehicle diagnosed on time to rectify the issue and to avoid further complications that may result to you spending more for repairs. 

We hope that reading this article will help you understand why your check engine light comes on and ways you can go

Related Articles:

about in resolving the issue.

Sharing is caring!

Scroll to Top