How To Disengage 4 Wheel Drive Ford F150

How To Disengage 4 Wheel Drive Ford F150 & Ford F150 4 Wheel Drive Problems

Sharing is caring!

In case you’re having issues engaging four-wheel-drive vehicles, note that it is due to the lack of lubrication that makes it get stuck in the four-wheel mode. If you face this, then know that it’s a common issue that isn’t too serious.

How To Disengage 4 Wheel Drive Ford F150 & Ford F150 4 Wheel Drive Problems

It is vital you switch your vehicle to two-wheel drive whenever you’re driving on a very dry surface. This is because driving in a four-wheel mode while on the highway has the possibility of decreasing fuel efficiency which might lead to you running our gas much sooner and can result in possible damage. see also Ford 5.4 Timing Chain Replacement Cost

Ford F150 4 Wheel Drive Problems

If there’s any popular full-size truck you can find on the road, then it must be the Ford F-150. This brand of vehicle is tough, reliable, and comfortable. However, there is some setback too. Below are Ford f150 4 wheel drive problems.

·        Exhaust Leaks

Some owners of 5.4L V8 and 4.6L engine power might sometimes hear a ticking sound via the engine which changes with engine RPM. Note that this is caused by leakage on its exhaust manifold by either broken or loose exhaust studs. But the hardware can be replaced.

·        Coolant Leaks

Coolant Leaks happens to be an issue with the 2009-2013 models. Its outlet and inlet connectors can become cracked and brittle with continued usage, which causes leaks. Though you can still repair these connectors using new heater core connectors, which can be found on the firewall.

·        Sloppy Console Shifter

The 2009-2010 models that use console shifters will pass through hard times from worn-out shifter cable bushings. Any worn-out bushings have the potential to make the transmission shift selector feel sloppy. But it can be repaired by just changing the old worn-out bushings with new ones, which can be done by disassembling the center console.

·        Remote Entry Key Fob Problem

Sometimes damaged remote key fob can cause an issue. While using the fob buttons, you will discover that their symbols will begin to wipe out due to thousands of button pushes, and this makes you start guessing where to press to lock or unlock the truck.

But you can simply solve this by swapping the key fob case, but in case the key fob is completely missing, then you should buy a brand new key fob that matches your truck.

·        Issue of Broken Spare Tire Hoist

Putting spare tires under the truck means that the hoist mechanism can be affected by anything that comes up from the road surface. There’s the possibility of having a spare tire hoist, and replacing it is very easy with just a few bolts.

HOW TO CHANGE SPARK PLUGS FOR FORD RANGER

Ford F150 2h, 4h 4l And Ford F150 Awd Mode

The AWD model is known as a vehicle that uses all four wheels all the time. There’s an advantage as you’ll get the most grip all the time. There won’t be any worries about it engages or not.

A permanent 4WD system is a bit different from AWD as they have the 4H and the 4L settings. But many 4WD systems allow drivers to switch and use rear-wheel drive whenever it is needed. It provides drivers with more fuel economy during better driving conditions. 

However, there is more to learn. So let’s see other ford f150 options that are available in most new model Fords so that you’ll know the different driving modes.

2H

The 2H happens to be a rear-wheel drive, which is the best choice during regular driving conditions. Anytime you find yourself on dry pavement, you should use 2H.

4H

The 4H is utilized for slippery conditions such as sand, mud, etc. when at high speed. Anytime you’re on an icy road, then use 4H. Please you shouldn’t use 4H when on a dry surface. Make sure to switch between 4H and 2H at any speed.

4L

4L is meant for slippery conditions and low speeds. This 4L offers more torque to vehicle wheels which isn’t necessarily more traction. In case you are driving via mud or deep snow, then you should use 4L.

How To Disengage 4 Wheel Drive Ford F150

It is really unfortunate that lots of F-150 owners struggles to disengage their 4 wheel drive. You must learn how to overcome this issue that’s associated with disengaging 4 wheel drive ford f150 truck, as this can be quite easy. To easily do this, you’re required to understand how your 4×4 system works and where to check whenever the issues come up.

Many times when you’re switching between RWD and 4×4, check out the toggle switch which is put there by Ford. So whenever you intend to switch from 4×4 Hi drive, all you have to do is just stop your vehicle. Next, hold the brake, or keep it in neutral and then move the 4WD control to the 2H from 4L. Isn’t that easy? I guess it is.

What To Do When Ford F150 4 Wheel Drive Not Engaging

Does it mean that the ford f150 4 wheel drive not engaging as successfully as expected? If so, then there are lots of possible reasons, such as transfer gear misalignment, or transfer shift fork wear.

My advice is for you to consult a professional mechanic for inspection to location, diagnose the problem, and provide you a precise assessment cost of the damage and repair estimate.

How To Put My Dad’s 99 Ford F150 Into 4-Wheel Drive

Today, 4-wheel drive vehicles are not as difficult as they use to be in the past. They’re currently easier now to switch into 4-wheel drive. Below are some steps to switch Ford F150 into a 4-wheel drive.

Step 1

Examine the center hub in one of your front tires. It will immediately inform you if you’ve manual or locking hubs. But in case there’s an inset hub in the middle, then you should check out for words such as free and lock or “4X2” and “4X4.” You’ll find an arrow that will be pointing the directions to turn the hub turntable and then engage 4-wheel drive.

Step 2

Put the hub turntable to the position lock or “4X4” via both front wheels. You can skip this step if you don’t have manual locking hubs.

Step 3

Go to the driver’s seat of your truck.

Step 4

Now start the truck by turning the ignition key. But in case you’ve got an auto-lock hub, check out for the button on the dash and then engage it so that the 4X4 light will be illuminated via your dash.

Step 5

Now find the 4WD transfer case stick-shift. You’ll find three common positions for the stick shift which are 2h, 4h 4L.

  • The 2H happens to be a rear-wheel drive, which is the best choice during regular driving conditions. Anytime you find yourself on dry pavement, you should use 2H. 
  • The 4H is utilized for slippery conditions such as sand, mud, etc. when in high speed. Anytime you’re on an icy road, then use 4H. Please you shouldn’t use 4H when on dry surface. Make sure to switch between 4H and 2H at any speed.
  • 4L is meant for slippery conditions and low speeds. This 4L offer more torque to vehicle wheels which isn’t necessarily more traction. In case you are driving via mud or deep snow, then you should use 4L.

Now park your truck or put it neutral and put your foot on the brake. Just put the transfer case stick-shift into position 4X4. In case there are push buttons to turn on the auto-lock hubs, just press the 4 Hi or 4X4 button. Once done correctly, you’re now in 4-wheel drive. you may also love to read this post ( FORD RANGERS SPARK PLUG WIRES REPLACEMENT)

Ford F150 4 Wheel Drive Not Engaging

In case your Ford f150 4 wheel drive not engaging, then there are lots of possible reasons, such as transfer gear misalignment, or transfer shift fork wear.

My advice is for you to consult a professional mechanic for inspection to location, diagnose the problem, and provide you a precise assessment cost of the damage and repair estimate.

How To Engage 4 Wheel Drive 2006 Ford F150

Whenever you want to engage to 4WD especially on the 2006 ford f150, it’s good you position the vehicle on a surface that is leveled.

For you to easily engage 4 wheel drive, just make sure that your truck is fully parked.

  • While your foot is put on the brake
  • Just shift your truck into Drive mode
  • Then release the brake, and roll forward slowly
  • Now press the 4 wheel drive button.
  • Then shift the truck into Neutral whenever the light on the 4 wheel drive button flashes, while you continue to roll forward slowly.
  • Once done, 4 wheel drive system will then engage and flashes light.
  • Once you noticed that the 4 wheel drive light stays illuminated, it’s time to shift back into Drive and then continue on your way.

So this is how to engage 4 wheel drive 2006 ford f150

How To Engage 4 Wheel Drive 2004 Ford F150

The 2004 ford f150 is equipped with 4 wheel drive, and this locks the front wheels to the front axle which distributes power from the engine for more traction. When you engage 4 wheel drive, it transfers power to all four wheels, and this can be of help in snowy, wet, or off-road conditions.

You can activate a 4WD by using the lever found near the gearshift or the switch you find on the dashboard, steering column, or somewhere else which depends on the vehicle’s model year. But in case your 4 wheel drive switch is faulty, you might not be able to shift into 4 wheel drive.

Conclusion

I have been able to show you the easy way on how to disengage 4 wheel drive ford f150 and had shared some of the ford f150 4 wheel drive problems. As you can see in the article, there’s an advantage when you have a 4 wheel drive vehicle, as you’ll get the most grip all the time. There won’t be any worries about if it engages or not.

Related Articles: 2 BEST and Top SPARK PLUGS FOR FORD RANGER

Sharing is caring!

Scroll to Top